E-Cigarette Vaporizer portable charging case instructions

Home | Glossary

How do I use my ProSmoke Portable Charging E-cigarette Case?

Author: ProSmoke Electronic Cigarettes Views: 1081864 Created: 05/31/2017 01:55 pm 100% Rating / 1 Voters

How to charge your ProSmoke Portable Charging Case:

  • Using the included USB cable, you can charge your portable charging case with a computer or with the adapter included in the starter kit.  We recommend an initial charge of 8 hours to fully prime the battery but it is not required.  Subsequent charges will take 1-2 hours.
  • When the unit is plugged in, the bars on the LCD screen will progress from left to right indicating the charge level on the screen.  5 solid bars indicates a full charge.
  • To check the battery level of the charger, you can look at the LCD screen and the black bars indicate the charging level of the case.  All 5 bars indicate a full charge.  The green and red LED lights that light when pressing the start button are only indicators of the cigarette battery, NOT the case.
  • When no power blocks show in the LCD screen or the LED indicator blinks red on its own without pressing the button, the battery is used and needs to be recharged.


How to charge the ProSmoke battery using the Portable Charging Case:

  • Screw the battery into the charging socket inside of the case.
  • Press and hold the button for about 5 seconds until the LED on the ProSmoke battery blinks to indicate the charge has started.
  • The LED will blink green on the charger and turn to solid red. 
  • Although the LCD screen goes blank and the LED's turn off, the battery is still being charged. This is done to conserve battery energy.
  • When the battery is fully charged, you can press the button on the front of the charging case and it will be green. This indicates it is ready for use.  If the LED is red, the cigarette battery is still charging.

Please note that the screen will shutoff automatically no matter the action to conserve battery on the unit.

You ARE able to charge the portable case with the provided cable while charging a battery at the same time with no issues.

You ARE able to leave the e-cigarette battery screwed in to the charger with no concerns.  It will not overcharge or ruin the battery.

Comments 1
  • #
    [ jaginoz ]: Why doesn't my ProSmoke Charging Case NOT WORK? 03/17/2012 05:45 am

    Thank you very much for your prompt reply!
    My ProSmoke Charging Case does work! Fantastic, I'm thrilled to no-end!
    This means that, my new ProSmoke Ecigarette Starter-Kit is the best ecigarette that I've purchased to date! With, the longest-lived batteries (that includes the battery in the charging case, of which I've yet to recharge since my initial charge upon receiving it, 2 months+ ago), and producing the most smoke out of all the ecigarettes that I've tried to-date! Kudos, goes out to all at, ProSmoke! Keep up the good work. Best Regards, John George aka; jaginoz

Quick Jump Menu

ecig top frame bottom
WARNING: This product is intended for use by persons 18 or older, and not by children, women who are pregnant or breastfeeding, or persons with or at risk of heart disease, high blood pressure, diabetes, or taking medicine for depression or asthma. If you have a demonstrated allergy or sensitivity to nicotine or any combination of inhalants, consult your physician before using this product. This product is sold purely for recreational purposes - it is not a smoking cessation product and has not been tested as such. You must be over the legal age in your state to buy or use this product.

Nicotine is highly addictive and habit forming. Keep out of reach of children. This product contains Nicotine, a chemical known to the state of California (Proposition 65) to cause birth defects or other reproductive harm. No statements made on this site have been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease